Section Car Operation in NSW
#1
Folks, the Motor Car Consortium is holding an info session mid year near Sydney in relation to progress and info about future section car operations in NSW.

See attached link (click on news) for more info.

http://motorcarconsortiumltd.org.au
#2
(13-Apr-2012, 08:38 AM)CNsylvester Wrote: Folks, the Motor Car Consortium is holding an info session mid year near Sydney in relation to progress and info about future section car operations in NSW.

See attached link (click on news) for more info.

http://motorcarconsortiumltd.org.au

I am pleased to confirm arrangements have been firmed up for the Induction Workshop.

It will be held in Lithgow, New South Wales, over the weekend on September 1 and 2 2012.

I have set up a registration page within the MMS - however you will need to register first – motorcarconsortiumltd.org.au/MMS

This is free to all current members. Non-members are welcome to register, but take 2nd place to members. They will be charged $75.

I am pleased to advise that the Board endorsed the last tranche of
documentation making up the Safety Management system last night. This means we are one step closer to being operational.

http://www.motorcarconsortiumltd.org.au

(Numbers are limited).


#3
Couple of spots remain for the 1st and 2nd September induction workshop.



(13-Apr-2012, 08:38 AM)CNsylvester Wrote: Folks, the Motor Car Consortium is holding an info session mid year near Sydney in relation to progress and info about future section car operations in NSW.

See attached link (click on news) for more info.

http://motorcarconsortiumltd.org.au

#4
Ken, have such operations occurred in NSW in the past?
[Image: main.php?g2_view=core.DownloadItem&g2_itemId=61026]

#5
(12-Aug-2012, 04:22 PM)Mick Wrote: Ken, have such operations occurred in NSW in the past?

Not to my knowledge in NSW. This will offer section car and hand car operators the opportunity to legitimately access a network under dedicated / organised accreditation (where we can establish an Access Agreement).
#6
(13-Apr-2012, 08:38 AM)CNsylvester Wrote: Folks, the Motor Car Consortium is holding an info session mid year near Sydney in relation to progress and info about future section car operations in NSW.

See attached link (click on news) for more info.

http://motorcarconsortiumltd.org.au

If anyone who is coming to the NSW workshop needs some ST2 parts, let me know.

#7
(21-Aug-2012, 01:16 PM)CNsylvester Wrote:
(13-Apr-2012, 08:38 AM)CNsylvester Wrote: Folks, the Motor Car Consortium is holding an info session mid year near Sydney in relation to progress and info about future section car operations in NSW.

See attached link (click on news) for more info.

http://motorcarconsortiumltd.org.au

If anyone who is coming to the NSW workshop needs some ST2 parts, let me know.
Ken, You should take a 3'6" gauge unit with you to Lithgow. There is a section of track near there that could probably do with some of the rust removed off the rail head!


Forum Jump:


Users browsing this thread: 1 Guest(s)